Your ignition interlock report is the log your device keeps between Service visits: every breath sample and its result, engine starts and stops, disconnections, tampering alerts and, where applicable, a photo taken at each test. It’s downloaded at each Service visit and reviewed by your provincial monitoring authority.
Most of that log is routine. A passing sample before the morning drive, a start, a stop, another passing sample on the way home. A handful of entry types get a closer look from your monitoring authority, and once you know what the device writes down, you can avoid most of them.
What Your Ignition Interlock Device Records
The Smart Start Canada ignition interlock device records test results, engine starts and stops, disconnections and tampering for review. Each of those becomes a dated, timed line in your report.

Image alt text: A woman in the driver’s seat holds a Smart Start ignition interlock handset near the steering wheel, ready to give a breath sample before starting her car.
In practice, that covers:
- Breath samples and results. The sample you give before starting the car, plus every rolling test and rolling re-test the device asks for while you drive, each with its result.
- Engine starts and stops. When the vehicle was started and switched off, and whether a passing sample came first.
- Disconnections and power loss. Unplugging the handset while the device is on, or the device losing power, both leave an entry.
- Tampering alerts. Interference the device detects with the handset, the wiring or the camera (if applicable). When the device detects tampering, it aborts the test and won’t let the car start.
- Photos, where applicable. The optional Photo ID camera is about one cubic inch and mounts on the inside of the driver’s side window. It takes a picture at each breath test and stores it with the date and time. The camera option is available only in Yukon and Quebec.
Anyone can drive your car, but they have to use the device, and you’re responsible for every reading it records, whoever gave the sample. If a friend blows a fail in your car on Saturday, that fail is on your report.
When Your Ignition Interlock Report Comes Off the Device
The data stays on the device until a technician downloads it. That happens at each Service visit, every 30 to 60 days, at a Smart Start Canada service centre, and the log then goes to the authority that runs your program. You can check your next appointment on the handset itself: press # and then 1 on the keypad and the screen shows the date and time.

Image alt text: An ignition interlock handset mounted on a car dashboard beside the steering column, its green light on as the driver gets ready to leave at dawn.
Two points in the program change that routine:
- At removal. A final download happens before the device comes out. In Alberta, once the final download is completed, Smart Start sends your last report readings to Driver Monitoring and Compliance.
- In Quebec, between visits. The SAAQ program provides for real-time transmission of data from the device to the SAAQ, so your data may also reach the SAAQ between Service visits, if applicable.
A missed Service date shows up too. The download doesn’t happen on schedule, and the handset starts a countdown (SRVC / L followed by the hours left). Once the screen shows LOCKOUT SRVC, the device won’t accept a test until you call Smart Start Canada for an unlock code from inside the vehicle.
Who Reads Your Ignition Interlock Report in Each Province
Each province runs its own program, so the authority that reviews your report depends on where you’re licensed. Smart Start Canada serves All Provinces, and the table sets out what each authority’s own page says it does with the data.
| Province | Program authority | What the authority says it does with the data |
|---|---|---|
| Ontario | Ministry of Transportation (MTO) | When a sample isn’t given or doesn’t pass, the device issues a warning and records the event. |
| Alberta | Transportation and Economic Corridors (Monitoring and Compliance) | At removal, the provider sends your last report readings to Driver Monitoring and Compliance. |
| British Columbia | RoadSafetyBC | Service appointments let RoadSafetyBC monitor the device’s activity history, and the Superintendent reviews program activity reports during the term. |
| Saskatchewan | SGI | SGI runs Saskatchewan’s program. Contact SGI about how it reviews your device record. |
| Manitoba | Manitoba Public Insurance (MPI), Driver Fitness | All information recorded by the device is monitored by Driver Fitness, including fails and other violations. |
| Quebec | SAAQ | You keep the reports produced during the program and present them to the SAAQ on request. |
| Yukon | Driver Control Board | The Driver Control Board runs Yukon’s program. Contact it about how it reviews your device record. |
| Northwest Territories | Driver and Vehicle Services | Driver and Vehicle Services runs the Northwest Territories program. Contact it about how it reviews your device record. |

Image alt text: A two-lane highway winds through evergreen forest toward the Rocky Mountains on a clear autumn day in western Canada.
In British Columbia, you set and follow a schedule for downloading your device data at a service centre, and RoadSafetyBC uses that data at the end of the term when it considers removing the device. In Manitoba, you attend Smart Start at regular intervals so the results can be retrieved. In Quebec, the data the device collects is treated as generated by your use of it unless you can prove otherwise, so keeping your own copies is a sensible habit.
For anything about how your own record will be reviewed, contact the authority in the table directly.
Report Entries Logged as Violations
A few entry types are logged as violations, and the list differs from one province to the next. These are the common ones:

Image alt text: A driver sits with her hands on the steering wheel of a parked car, the ignition interlock handset mounted on the dashboard within reach for a rolling test.
- A failed breath sample. A FAIL on the screen, especially without a passing follow-up sample soon after.
- A missed rolling test or rolling re-test. The device asks for a sample while you’re driving, and skipping it starts a countdown on the screen.
- A start without a passing test. The log shows the engine running with no PASS before it.
- A handset disconnection. Unplugging the handset while the device is on.
- Power loss. The device losing power for 15 minutes or more, which a weak battery or charging system can cause.
- Leaving the key on without testing. Sitting with the ignition on for 4 to 6 minutes without giving a sample.
- A missed Service date. The Service visit and its download don’t happen on schedule.
An aborted test, where the screen asks you to blow again, isn’t a violation. Retake it once the screen shows BLOW.
Each of these is an entry, and your monitoring authority reviews the whole record to determine what an entry means for your program. Smart Start Canada can’t determine that for you. If you’re unsure about an entry, contact the authority in your province.
How an Occurrence Report Adds Context to an Entry
Your report shows what happened. An occurrence report lets you explain the circumstances. It’s a short written account you file after a fail or any other violation, and your monitoring authority can view it directly, so your explanation reaches the same people who review the entry.
File one when:
- You believe a fail came from something other than a drink. The device’s sensor responds to alcohol from any source, not only a drink, and an occurrence report puts your account of it on file.
- A mechanic worked on the car. A repair can leave a violation on the device, and the report records the event whoever caused it.
- Anything else left an entry you can explain. A dead battery, for example.
You file an occurrence report in the Manage Your Account section of the Smart Start Canada website. Write it soon after the event, while the times and details are fresh, and keep it to the facts: what happened, when, and what you did next.
How to Keep Your Ignition Interlock Report Clean
A clean report comes from a few habits repeated every day, and none of them take long.

Image alt text: A driver blows into an ignition interlock handset while seated in his car, giving a breath sample before starting the engine.
Drink water before every test. Water clears mouth alcohol and other breath contaminants. Make sure the water is out of your mouth before you blow, so moisture doesn’t build up inside the device, and take a deep breath right before the sample.
Take the follow-up test after a fail. If you get a FAIL you believe came from an outside source, air out the car, rinse your mouth with water and take the next test as soon as the device signals it’s ready. A passing sample right after the fail becomes part of the same record.
Complete every rolling test and rolling re-test. When the device asks for a sample on the road, pull over when it’s safe and give it before the countdown ends. Before you switch off the engine at the end of a drive, check that the device isn’t asking for a test.
Keep the handset connected while the device is on. Disconnect it only when the device is off, for example to bring it inside during extreme cold, which also shortens warm-up time.
Look after your battery. The device draws little power, but a weak battery or alternator can cause power-fail entries from low voltage. If the device has no power, call Smart Start Canada at 1-844-432-4776 (1-844-282-8300 in Quebec) before touching the device or the vehicle’s wiring.
Call Smart Start Canada before any repair. Contact Smart Start Canada when you’re taking the vehicle in, and tell the mechanic or shop that they need to contact Smart Start Canada for the correct procedure. If an entry shows up after the repair, file an occurrence report and keep the mechanic’s receipt.
Keep every Service date. Check the date on the keypad with # and 1. If it won’t work for you, rebook by phone or through your Smart Start Canada account before it passes.
Keep your own records. Hold on to Service receipts, mechanic receipts and a short note of anything unusual, with the date and time. Quebec participants are required to keep their reports and present them to the SAAQ on request, and one folder for all of it helps in any province.
Frequently Asked Questions
What does an interlock report look like
It’s a dated log of events. Each line records something the device registered: a breath sample and its result, an engine start or stop, a disconnection, a tampering alert and, where the Photo ID camera is used, a photo. Entries that count as violations, such as a missed rolling test, are there for your monitoring authority to review. The program sets the layout, so ask your provincial authority if you want to see how yours is presented.
What does an ignition interlock device do?
An ignition interlock is a small breath-testing device connected to your vehicle’s ignition. You blow into the handset before starting the car, and the car starts only after a passing sample. While you drive, it asks for rolling tests and rolling re-tests at random times, and it records every result for your monitoring authority. It can’t turn the engine off while you’re driving.
What causes a violation on interlock?
The common causes are a failed breath sample, a missed rolling test or rolling re-test, starting the vehicle without a passing test and a power loss of 15 minutes or more. Disconnecting the handset while the device is on and leaving the key on for 4 to 6 minutes without testing also count. Violations differ by province, and after most of them the device starts a countdown on the screen until the violation is reset.
See What Your Device Records
Every line in your report comes from a feature of the device in your car. The Smart Start Canada product page lists what the SSI-20/35 records and links the user manual for your handset. See what the ignition interlock device records and download the user manual.
Disclaimer: This article provides general information only. Ignition interlock program rules vary by province and territory and change over time. Always confirm current requirements directly with your provincial or territorial program authority (the Ontario Ministry of Transportation, Alberta Transportation and Economic Corridors, RoadSafetyBC, SGI, Manitoba Public Insurance, the SAAQ, the Yukon Driver Control Board or the Northwest Territories’ Driver and Vehicle Services) or Smart Start Canada before making decisions about your enrolment.
