What Happens on Installation Day: Your Ignition Interlock Install, Step by Step

Image alt text: Driver handing car keys to a service centre staff member at check-in for an ignition interlock install

On installation day, a certified technician wires the interlock into your vehicle, you, the participant, sign the program paperwork, and you get hands-on training in giving a breath sample. You have to be there in person, and an interlock installation typically takes two to three hours. In most provinces you then take your installation certificate to a licensing office.

An appointment can fall through before the technician picks up a tool. A missing form, a payment problem or an approval that hasn’t arrived yet means you rebook, so most of your preparation happens in the week before.

Before You Book: Get the Green Light From Your Province

Your service centre can’t install the device until your province has cleared you for its program. Each province runs that step through its own authority, and the order of steps differs from one to the next. If your letter lists a step you don’t understand, call the authority that sent it before you book, because the service centre can’t clear you on the province’s behalf.

Ontario

The Ontario Ministry of Transportation (MTO) runs the Ontario Ignition Interlock Program. Your MTO letter confirms you’re in the program and names your stream. Once your licence is reinstated, a short install window starts, so book with that date in mind. The Ontario interlock program page covers the provincial program and install information. If you’re not sure of your reinstatement date, the booking agent can check it with MTO for you.

A few steps come before the appointment, if applicable: your reinstatement fees need to be paid at least two business days ahead, and you may need to enrol in the Back on Track program first. You can ask to be enrolled even if you can’t pick an install date yet. The Ontario install information page lists each step.

Alberta

In Alberta, your letter comes from Alberta Transportation and Economic Corridors (Monitoring and Compliance). You buy the program application at a registry agent, complete it and send it in as the form instructs. Book the install once the application is approved and any required course is finished, if applicable.

Bring your course completion certificate to the appointment, because you show it to the installer on the day rather than mailing it in with your application. The Alberta install information page has the booking steps.

British Columbia

RoadSafetyBC sends the letter that says you’re required to take part in the BC Ignition Interlock Program. Next, call ICBC to find out whether you’re eligible to apply for an interlock-restricted licence. Book the install only after ICBC confirms you’re eligible.

In BC, you also have to attend every appointment in person, including Service visits. The British Columbia install information page walks through the order.

Manitoba

Manitoba Public Insurance (MPI) sends the program letter, and Driver Fitness monitors the program. Before you book, you complete a licence reinstatement interview with MPI, which is how you get the documents the program requires.

Once the interview is done, you book your installation. The Manitoba install information page covers the booking steps.

Saskatchewan

In Saskatchewan, the letter comes from SGI. Complete any course SGI requires, if applicable, and confirm your eligibility with SGI before you book. The Saskatchewan install information page lists what to confirm first.

Quebec

The SAAQ issues your licence first and then gives you a window for your install. Book inside it, and read how Quebec’s ignition interlock program runs before you go. On the day, Quebec drivers bring their licence, a valid vehicle registration certificate and a valid vehicle insurance certificate.

What to Bring to Your Interlock Installation

Staff check your documents at the start of the appointment. If anything on the list is missing, the service centre can’t do the install, and you’ll have to rebook (a missed appointment fee may apply).

Image alt text: Vehicle ownership papers, a signed permission form and car keys gathered on a kitchen table the night before an interlock installation

Put these in one folder the night before:

  • Proof of ownership. Your vehicle registration in your name.
  • A Permission to Install form, if applicable. If the vehicle is leased or registered to someone else, the registered owner signs this form before the appointment. Without it, you’ll be turned away.
  • A bill of sale for a dealer plate. Dealer plates are accepted with a bill of sale within 14 days of purchase. If the bill of sale isn’t in your name, you’ll need the Permission to Install form as well.
  • Your province’s documents, if applicable. That could mean a course completion certificate in Alberta, or your licence and insurance certificate in Quebec.
  • A way to pay. Service centres take debit, Visa and Mastercard. Only a few accept cash, and an install can’t go ahead without payment.

Appointments run on time slots, so arrive at the start of yours. A late arrival can leave too little time to finish the install, and the service centre gives priority to drivers who are there when their slot starts.

Is Your Vehicle Ready?

Most vehicles can take an interlock, but the technician needs one that’s safe to work on and safe to drive home. Check four things before you leave for the service centre.

Image alt text: Smart Start Canada technician working under a vehicle’s dashboard during an ignition interlock installation

  1. A working odometer. Insurable vehicles need one, and so does the install.
  2. A sound electrical system. No dangerous, missing or bare wires, plus a good battery and alternator. A weak battery can cause low-voltage problems throughout your program.
  3. Safe to operate. The vehicle has to be drivable, with safety equipment such as the hazard lights working.
  4. Clean. The technician works in and around the interior, especially the driver’s footwell and under the dashboard.

If you have a remote starter, expect it to stop working. Every engine start needs a passing breath sample, so remote start stays disabled while the interlock is installed and works again once the device comes out.

What the Technician Does

While you wait, a certified technician attaches the device to your vehicle’s wiring under the dashboard and mounts the handset within reach of the driver’s seat. The handset is a small handheld unit with a colour display and a keypad, connected to the ignition.

Image alt text: Certified technician connecting ignition interlock wiring beneath a car’s dashboard in a service bay

Every connection made during the install comes out again at your interlock device removal appointment at the end of your program. Once the device is gone, it’s hard to tell it was ever there. For how the handset and the ignition work together once you’re driving, see how an ignition interlock device works.

In Yukon and Quebec, the technician also mounts a Photo ID camera, if applicable. It’s about one cubic inch and sits on the inside of the driver’s side window, where it takes a picture with each breath test. Drivers anywhere else won’t have one.

You’ll also sign the program documents during the appointment. That paperwork, together with your training, is why the appointment can’t go ahead without you.

Your Breath Sample Training

Training happens at the installation appointment, before you ever drive with the device. The technician shows you how to give a sample. Then you practise, as many times as it takes for a pass to come easily.

Image alt text: Driver giving a breath sample into a handheld ignition interlock device before starting the car

The current device doesn’t use a hum, so you blow steadily into the mouthpiece and follow the prompts on the screen. Rinse your mouth with water before each test, and keep perfume, cologne, mouthwash and windshield washer fluid away from the handset while you give a sample. Each of those can contain alcohol that the sensor picks up, the source of most false positive readings.

The technician also covers the rolling test and rolling re-test. While you’re driving, the device asks for another sample at random times. When it does, pull over somewhere safe before you blow. The horn sounds once the timer for the sample reaches its halfway point, and anyone driving the vehicle has to complete these tests, not only you.

You’ll go through the screen messages, too: what each result on the display means, and which key recalls the date and time of your next appointment. If a message puzzles you later, the ignition interlock FAQs explain the display and how to give a clean sample.

After the Appointment: Your Next Steps

The install gives you a working device. In most provinces, though, your interlock-restricted licence still needs one more stop before it’s active.

Image alt text: Car parked in a frosty Canadian driveway the morning after its interlock installation

Take Your Certificate to the Licensing Office

You leave with an Install Notice Certificate. Where it goes depends on your province:

  • Alberta: take the certificate and two pieces of ID to a registry agent to get your interlock-restricted licence.
  • British Columbia: take the Install Notice Certificate and two pieces of ID to an ICBC Driver Licensing Office.
  • Manitoba: bring the certificate, your Ignition Interlock Application and two pieces of ID to an MPI Service Centre.
  • Saskatchewan: visit an SGI location to receive your interlock-restricted licence. The Saskatchewan interlock program page covers the provincial program and install information.
  • Ontario and Quebec: your licence is reinstated or issued before the install, so follow the steps in your MTO or SAAQ letter.

Go promptly. Your restricted licence isn’t active until the licensing office has processed the certificate.

Your First Drive

You’ve already practised with the technician, so the routine on your first drive will feel familiar: blow, wait for the pass, start the engine. Expect a rolling test and rolling re-test on the way home. Pull over safely, give the sample, and carry on.

If your install falls in winter, the handset takes longer to warm up in very cold weather. Disconnecting it and bringing it indoors on the coldest nights shortens the warm-up, so the device is ready sooner when you get back in the car.

Service Every 30 to 60 Days

Your device is Serviced every 30 to 60 days at a service centre. At each Service visit the technician checks the device, updates its software and downloads the data for reporting. Book Service by calling 1-844-432-4776 or through your Smart Start Canada account, and don’t let a Service date slip. The provincial authority reviews your record and decides any next steps, so contact your authority if you have questions about a missed date.

Two other situations need a phone call first. If your vehicle needs repairs, contact Smart Start Canada before you drop it off and ask the shop to call Smart Start Canada before any work near the ignition or the electrical system. If you’re changing vehicles, book a transfer appointment and bring both vehicles to it.

Program Costs by Province

Fees vary by province, and each province’s page on the Smart Start Canada site lists the current figures. Check the Ontario program fees, Alberta program fees, British Columbia program fees, Saskatchewan program fees or Manitoba program fees page. Quebec drivers can find the program details on the Quebec program information page linked in the Quebec section above.

Frequently Asked Questions

Can you install an interlock yourself?

No. A certified technician installs the device at a service centre, and you have to be there for the paperwork and your breath sample training. If you don’t attend, the appointment is cancelled and a cancellation fee may apply.

How much does interlock cost in Ontario?

Costs change over time, so the current installation and Service fees are listed on the Ontario program fees page. Your provider also explains its fees when you register for the program.

Can someone else start my car with an interlock?

Yes. Anyone can drive your vehicle, but they have to pass the breath test to start it and complete any rolling test and rolling re-test along the way. You’re responsible for every result the device records, whoever gave the sample.

Book Your Interlock Installation

Smart Start Canada serves All Provinces from service centres coast to coast and has completed more than 1.1 million installations. When your approval is in hand and your documents are ready, find your nearest Smart Start Canada service centre and book your interlock installation, or call 1-844-432-4776.

Disclaimer: This article provides general information only. Ignition interlock program rules vary by province and territory and change over time. Always confirm current requirements directly with your provincial authority (the Ontario Ministry of Transportation, Alberta Transportation and Economic Corridors, RoadSafetyBC and ICBC, Manitoba Public Insurance, SGI or the SAAQ) or Smart Start Canada before making decisions about your enrolment.